|
|
|
04401-10Pull clamp with integrated clamping screw automation capable |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Carbon steel.Version:Body black oxidised.
Workpiece support tempered (HRC 39-45) and ground
Clamping screw hardened and black oxidised.Note:1. First, place the workpiece on the workpiece support or the clamping screw of the pull clamp. This will compress the internal spring and retract the clamping screw into the main body.
2. Position the tapped hole in the workpiece above the clamping screw.
The tip of the clamping screw is pressed lightly into the tapped hole by the spring pressure.
3. When the drive element is actuated, the clamping screw rotates into the tapped hole of the workpiece and clamps it.Advantages:Automation capable
High clamping forces
Rapid clamping
Integrated clamping screwAccessory:04401-20 Extension unit.Supplied with2x locating pins Ø 8 (h7) x 40.
1x protection plug.Special features: DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
| Order No. | B | B1 | D
| D1 | D2 | D3
for screw to
DIN 912 | D4 | D5 | D6 | H | H1 | H2 | H3 | H4 | H5 | Travel
S | SW | Tightening
torque
max. Nm | Clamping
force
kN | CAD | Acc. | Price | Order |
|---|
| 04401-10-12 | 90 | 70 | 125 | 80 | M10 | M10 | M12 | 8 | 104 | 125 | 105 | 20 | 30 | 80 | 20 | 18 | 19 | 27 | 10 |  | | 0.00 € | | | 04401-10-16 | 90 | 70 | 125 | 80 | M10 | M10 | M16 | 8 | 104 | 125 | 105 | 20 | 30 | 80 | 20 | 21 | 19 | 45 | 15 | | | 0.00 € | |
Other items in this category |
|
| Quick order / Check availabilityOrder article directly or check availability.display |
|
